Ducted Fans.com        F-100 Super saber EDF jet Aircraft

Home
Jets
Planes
Gliders
Propulsion
Accessories
Novelty
Videos
Projects
Photo Recon
Research Photos
Events
Links
kid stuff
Note
Contact
News
Helicopter
Ordering
Ordering
Phone
330 USA 1000
1(330)872 1000

24/07 Email Us!
Located In The US of A

   

F-100 Super Saber EDF electric Jet RC Aircraft

 
F-100 Grumania presented by ductedfans.com

The F-100 90 mm Composite EDF Jet

 SU 27 Grumania presented by ductedfans.com

This F-100 EDF kit has a wingspan of 1000 mm and a length of 1400mm.It is an all composite kit for two 90mm EDF units like the MBM Jets K90, DS 51, WEMOTEC Midi or similar.A typical layout is a 840FM Astro 40 Motor & Midi Wemotec Fan, Lehner, Mega 22/30/3 motor, 90 Amp Jet Mate controller and 7 to 8s Batteries ( 3800+mah ). With this layout, the F-100 is a real thorough bred with lots of power. Although very fast, its strong point is the slow flying. It does not show up any tendencies to flip over. The model is very easy to control at ANY speed. The kit is equipped with glass fibre ducts that have a defined stop to hold the fan units in place. The fans are assembled from the rear end and no openings have to be cut in the airframe.

Other features of this fantastic jet are:

  • 100% scale outline
  • scale surface detailing on all parts
  • scale canopy and cockpit kit included
  • extra glass fibre part for speedbrake ( access hatch)
  • life hinged rudders
  • detachable wings
  • easy RC layout with no ailerons required ( taileron)
  • formers for scale landing gear included
  • very strong glass fibre parts
  • grey primed surface
  • bare kit weight approx.1450 grams
  •  
F-100 Kit from Ductedfans.com  
The F-100 Camo EDF JET Ductedfans.com

    The airplane's geometry and airfoils are designed for a very wide speed range at minimum drag, allowing fast fly-bys as well as precise aerobatics.

    Landing speeds are very low, due to the airfoil design and the speed brake in the center of wing, just below the fuselage.

    More info and photos comming soon.

    Specification
    Construction: All Composite, the F-100 is consequently designed as a very lightweight all-composite structure, with features similar to a world class F3A-Pattern plane. Lightest lay-ups, perfectly engineered aerodynamics and structural reinforcements just where they are needed, the Grumania SU is perfectly suited for electric ducted fan flying (EDF). Fan: DS 51 or similar
    Cells: Tanic 3800 5S
    Retracts: SpringAir 602S or 301 / Behotec wheels and brakes

    This jet was designed from the start to be electric, so it is light but strong and can be fitted with a turbine,
    This jet can be sold Turn Key (Ready to fly) on request and sceduling,

    Wing Span 1180 mm
    Length 1444 mm
    Weight 1500 grams / 6 to 8lb
    Wing Area: 1260
    Scale Scale 1/12 class
    Twin

    It uses from 8 to 10s Lipo sells, depending on how it is powered: 3000 mAh +

    Controller/ ESC (Electronic Speed controler) Castle HV 85, Plettenburg, Jet mate P80 or simular

    Turn Key Note This Kit as a turn key is special order. We on occasion have some in stock but mostly they are built to order due to low production. Call for availability

    Item #GRUf10001

    The F-100 ARF Kit USD $1112.99This item is in stock 01/12/10

    DS 30 EDF electric ducted fan unit
     
NEU 1110 2y 8m Made in The USA Ductedfans.com  
Castle 45 HV Made in The USA Ductedfans.com 
Springair 602 Retract Made in The USA Ductedfans.com  
Spring legs for Spark RC EDF Jet Ductedfans.com

    More Set up Photos coming soon

    DS 30 EDF electric ducted fan unit
     
NEU 1110 2y 8m Made in The USA Ductedfans.com  
Castle 45 HV Made in The USA Ductedfans.com 
Springair 602 Retract Made in The USA Ductedfans.com  
Spring legs for Spark RC EDF Jet Ductedfans.com



    Home | Back to Electric Jets | Edf Units | Electric Motors | Propulsion | Email Us!

    Phone: 330-872-1000