JetCat P-80 turbine complete with starter includes:
Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual
Thrust: 21 LB @ 123,000 RPM
Weight: 2.9 LB, incl. starter
Diameter: 4.4 inches
RPM Range: 35,000 - 120,000
Exhaust gas temp.: 580°C -690°C
Fuel consumption: 9 oz per/min at full power
Fuel: Jet A1, 1-K kerosene
Lubrication: approximately 5% synthetic turbine oil in the fuel
Maintenance interval: 25 hours
#JETCATP8005 USD$2595.00 $2359.00
JetCat P-70 turbine complete with starter includes:
Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual
Thrust: 17.5 LB @ 123,000 RPM
Weight: 2.6 LB, incl. starter
Diameter: 3.7 inches
RPM Range: 35,000 - 123,000
Exhaust gas temp.: 620°C
Fuel consumption: 8 oz per/min at full power
Fuel: Jet A1, 1-K kerosene
Lubrication: approximately 5% synthetic turbine oil in the fuel
Maintenance interval: 25 hours
JetcatP7005$2595.00$2359.00
Kolibri_Micro_ turbine_ductedfans.com
The Kolibri is a real miniature gas turbine engine that operates on the same principles as the big paradigms. It suits exceptionally well for powering scale jet aircraft models of extremely small size and low weight.
Technical Specifications:
Thrust: 15N (1.5kp) at 243,000 RPM
Weight (engine alone): 200g
System weight incl. accessories and fuel for 8 minutes flight duration: ca. 750g
Dimensions: 55mm diameter, 125mm length
RPM: 95,000 to 243,000
Residual thrust at idle: ca. 2N (0.2kp)
Fuels: kerosene, JetA1, paraffine, each blended with 5% Aeroshell 500
Consumption at full power: ca. 65ml/min
Exhaust gas temperature at full power: ca. 680°C
Pressure ratio: 2.2
Air mass flow: 0.05kg/s
Exhaust gas velocity: ca. 330m/s
Starting: semi-automatic with external blower and LPG for combutor pre-heat
Control system: FADEC with RPM and EGT supervision
Fuel System: electric gear type pump and vaporizing combustor
Package Contents:
T32 Kolibri Turbine engine with RPM and EGT sensors and engine mount
Fuel pump with wiring harness
Fuel solenoid valve
Manually controlled gas valve
NIMH accu with 6 or 7 cells 350 -1000 mAh or LiPo with 2 cells 800mAh
Check valve for LPG
Quick release connectors for fuel and LPG
Tubing 3 and 4mm diameter
Fuel filter
Electronic engine control device (FADEC)
Hand data terminal
Startup blower 12VDC (car battery or lead-gel-accu)
Pricing:
Item # Kol4lb01(M)
$3154.00 plus shipping