|
cooling
1in x 1in cooling fans perfect for small e helis afix to ESCs, use them with our incert vents to keep air moving over hot cells wile charging or flying. plugs into spare port on reciver, uses little power you can add two and a switch that you can turn off from your transmitter. The pigtail will allow you to plug power in to cool the plans wile at rest if needed
USD$5.00 for fan USD$21.00 with switch
Use with Shultz Fut-40.160. we didnt have clear heat shrink to show installed, but the four fans would be placed on the chip side of the bord and silaconed together and heat srunk in place, then cut out the fan areas all pulling.
Use with HV 110/HV85 side to side
Blow air directly onto the colling fins.
Use with HV 110/HV85 end to end in push pull set up air inters one end and out the other.
Heatsink: For B20 style motors
USD$10.00
Heatsink: For B20 style motors
USD$6.00
Back to Mega Electric Motors
|