A simply superlative electric ducted-fan jet model, designed for the experienced and highly demanding EDF pilot. This model sets new standards with its pair of 90 mm high-performance ducted fan units, giving impressive climb performance and superb flight characteristics at high speed. With its futuristic, aerodynamically efficient good looks the Blade 2 is anything but an everyday electric jet model, and makes a real head-turner at any flying site.. This CAD-designed model is produced from CAM-produced moulds, and offers a level of performance which is scarcely credible from an electric jet, due primarily to its efficient aerodynamics and lightweight all-GRP construction. Our design brief called for maximum possible power system efficiency, so particular emphasis was placed on a short air duct in the area of the impeller units. Special features: Straightforward to hand-launch using a simple rubber cord catapult (no launch ramp or assistant required) Removable fuselage nose for convenient battery swapping (also making the model easy to transport) Good access to impeller units (simple, fast installation) Integral air duct Removable fuselage top section for easy RC component installation Aerial and servo leads pre-fitted in the wing Forced internal ventilation ensures effective cooling of batteries and power electronics CFRP reinforced main spar and D-box for maximum torsional strength. Specification: Wingspan Length Wing area Weight Wing loading 1404 mm 1022 mm 35,6 dmē 2600 - 3800 g 73-106 g/dmē Fitting Motors: Fun 500-19 (16 cells SubC) HP 220/20 A3P6 (16 cells SubC) HP 220/30 A4SP4 (18-22 cells SubC)

Motor: 2 x HP 220/20 A3 SP6 in 2 x Schuebeler Ducted Fan Controller: Hacker Jeti Master 99A-Regler Battery: Two 16 cells GP3300 zapped parallel, each Motor gets 16V from each 16 cells Static current: ca. 70A In flight current: ca. 60A Flight time: ca. 3-4 min

Out of the box

Schuebeller DS 51 DIA Electric 90mm fans. In stock now!