|
Pyranha
Bungee launch /
Specifications:
Wingspan:31.10in
Length:33.07 in
Weight: 1.75lb-2.43lb
Power plant impeller:
MF 480
Fast is the word to describe this MF480 jet. Built to be as light as possible without sacrificing body integrity.
Like speed? Then you "Gotta have one!" (This is not a park flyer).
Just Check the video below
Only two servo need for this made for speed 480 Jet.
Kit Contents:
White lightweight Epoxy glassfiber Fuselage
Balsa wing
Epoxy fiberglass airintake,
Thrust tube is Mylar
Foam nozzle.
Hardware package. (small parts to connect your servo's, bungee hook and Velcro for battery quick install/removal).
Balsawood tailparts are CNC-cut.
Photo CD-building instructions.
Pyranha decals!
Fan: The ducting is designed to fit the WeMoTec 480 mini Fan.
Motor:
JEPE recommends:The Mega 16/15/3 motor.
run on a high timed controller
4s Lipoly cells
Power consumption is 450 Watts
Thrust is a respectable 2.5lb,
Top speeds of 122mph (from Jepe 200km/h with his recomended setup)
Current of 34 Amps
6-7 minutes flight time (Kokam 3200mAh)
Make your Pyranha even faster with a Mega AC 16/20/2 higher 39 Amps.
the "no load" RPM should be best between 3000 and max 3300 RPM/V if using 4s
New For 2007 The Eleavators are molded Reinforced carbon fiber, carbon tail cone, and soon carbon reinforced epoxyglass wing. (Modelwill soon be 100% full fiber)
Mega 16/15/3 with Mini 480 40+ controller
Technical Data:
|
Wingspan:
|
79cm (31 Inch)
|
|
Length:
|
84cm (33 Inch)
|
|
Airfoil: root / tip-end
|
semi symmetrical / symmetrical 5,5%
|
|
empty Weight:
|
300 grams
|
|
max Weight:
|
800-1000 grams (28-35 ounce
or 1,7 -2,2 pound)
|
|
Motor: 3000-3300 rpm/V
|
Mega 16/15/3 or 16/20/2
|
|
Controller: high timing
|
Jet Mate Advance 60-3P or Phoenix-45 (no BEC !)
|
|
Fan:
|
Mini Fan 480 WeMoTec
|
|
flight Battery: 4s Lipoly
|
2 packs of 2s Tanic 3250,2080 or 3200 Kokam
|
|
Radio functions:
|
2x JR DS 281 servo's on tailerons + throttle control
|
|
Receiver Battery: 4,8V |
350 to 1400 mAh NiMh
|
|
Model take-off: |
Bungee launch or handlaunch |
PRICING:
Item # JPPyMK01Balsa wing version
Price USD $199.99
Ordering
Pyranha Composite wing coming
Item # JPPy MK02
price USD $289.99 We Have No hollow molded wings soon in stock, we will make enough so you can retro fit your balsa wing version if needed.
We have in stock, Kontronik, Hacker, Plettenberg and Lehner motors. All have top quality 480 size brushless for 4s Lipoly operation.
Loaded Fan.
Now you can get a Mini 480 fan balanced with motor, controller, and connectors.
The Pyranha, Video From SKS Video coverage of 05 SEFF, Flown by Jepe Jets USA Rep BOB B Using the DS 30 fan Lehner 15/30/11 Hi amp twin 5s packs 5s 2p or the LMT 15/30/18 on 10s same as the 1530/11 but you pick up kv IE rpm, IE speed. The best setups we have seen
Stay tuned for more info and updates. Our Thanks to Bob B.
**** If you want to order a full fiber kit today, we ship in about a weeks time.
All listed items in chart above in stock.
Note The DS 30 all carbon fan with a Lehner 15/30/11 was used in the video of the Pyranha. As demonstrated by Jepe USA Rep Bob Belluomini Flying the MK01.
Also the DS 30 all carbonfan is an excellant fit for the MK02 Pyranha. As demonstrated by Jepe USA Rep Bob Belluomini Flying the MK01.
DS 30 Dia
#JPUSPCW (Composite wing for Pyranha)
$110.00
#JPUSAPI (intake pyranha)
$25.50
#JPUSAPTS (tail group composite)
$89.50
VStingTS (V Sting composite tail set Fits Pyranh)
89.50 {photo coming}
We want to keep you flying!
Back to Electric Jets
|