Rafale RC Electric Jet for single 120 mm EDF unit

Rapid progress in electric model power technology now allows us to offer the Rafale in a version with retractable undercarriage. In this form it is now capable of ground take-off from level, closely mown grass strips as well as from hard surfaces. The net result with this twin-engined aircraft is much greater scale fidelity both on the ground and in the air. A matching 3-part pneumatic retractable undercarriage with steerable nosewheel is available as an accessory set (Order No. 7358/52). The update is completed by a new fuselage, moulded in Kevlar fibre for extremely low weight; it offers maximum strength and contributes to the Rafale’s phenomenal flight performance. All formers required for the retract system installation are pre-cut using CAD data, and are supplied in the set. The key factor in making this new version feasible is a completely new power system concept. The previous system consisted of two relatively small ducted fans, which are now replaced by a single, highly efficient 120 mm impeller unit. This all-carbon electric fan is a completely new development, and generates up to 40 N static thrust with a suitable motor. The single motor and fan mean that the overall cost is lower than the previous arrangement, even when power system components of the highest possible quality are employed. The recommended power plants are the Kontronik Tango 45-08 with 28 GP-3000 or GP-3300 cells, or the Tango 45-07 with 30 cells. With either motor the fan system spins at 22,000 rpm and produces a thrust of around 36 N at an input power of approximately 1650 W. As was the case with the original twin-fan Rafale (Order No. 1347/00), the two-part fuselage makes it easy to install and maintain the impeller system. The kit includes finished, accurately made GRP bifurcated pipes of refined aerodynamic form which are responsible for the efficient flow of air from the intakes to the fan unit, and from the fan to the divided efflux. RC functions: Standard functions are separate elevators and ailerons, plus motor speed controller, although a working rudder can also be fitted. As standard the canards are fixed, but experienced modellers will be able to fit an actuation system. Kit contents: Rafale kit Order No. 1358/00 Two-part fuselage in Kevlar fibre Wings from GRP Canopy Misc. wooden parts Detailed building plan and instructions Decal sheet Rafale kit Order No. 1358/01 See Order No. 1358/00 Additionally Impeller Turbo-Fan 4000

Impellerller setup:
WE recoment the Lehneer 1940/13 or the New 1521/1.5 on 8s or the 1527/1.5 on 10s

Specification:

TEXT
Length:104 cm
Overall wingspan
Wing area, main wing 38 dm2
Wing area, canard wing 3 dm2
Total area loading 78 g/dm˛
All-up weight 134 cm 3200 g (mit Fahrwerk und Lipo-Zellen)

Replacement parts:
Two-part fuselage in Kevlar fibre Order No. 1358/02 EUR 229,--
Conversion set Order No. 1347/10 EUR 320,--
The new Turbofan 4000 impeller can also be retro-fitted in the earlier version of the Rafale (1347/00). For this purpose we offer a conversion set consisting of: Turbofan 4000 impeller, front / rear bifurcated pipes and wooden parts (formers).
Rafale (1x120 mm ducted fan) aramid Scale model of the Rafale for 1 x 120 mm fan unit composite, aramid version

Pilot fits Rafale (no paint)

Item #. DFRPilot/00
USD $34.00 in stock 05/05/07

Dassault Brequet Rafale C01

Item #. ANRaf1358/00

Price USD $719.90