Ducted fans.com      Scale Birds

Critical Mass Prop ARF

Home
Jets
Planes
Gliders
Helicopter
Propulsion
Accessories
Novelty
Videos
Projects
Photo Recon
Research Photos
Events
Links
kid stuff
Note
Contact
*
Ordering
Phone
330 USA 1000
1(330)872 1000

Located In The US of A
   

Critical Mass ARF Model RC Plane


 
Critical Mass ARF radio controled plane fiberglass

With a fiberglass fuselage, all lines are smooth and clean three piece wing fully covered balsa, tail of balsa and ply. All hardware, painted fiberglass and cowl Model comes with fixed landing gear. Mechanical or air retracts can be used, the wheel well liners are included. To installing retracts the covering must be cut to reveal the wheel wells and installing the retract gear and servo into their pre-built locations. The photo illustrated instructions.

48" wing span
504 sq. in wing area
115oz Flying weight
48" long

For 4 or 5 channels: Throttle, Aileron (2 servos), Elevator, Rudder.

Hacker B50 13S 5.2:1, 15x10
10/16-1700NiCD/3000NiMH
TP6000 4S/5S3P
50mm spinner

Good Axi4120/14
Jeti Advance 70Amp
5S 2000 mAh 18.5V Lithium
BETTER 430/25-16w 14p 16x10
10/16-1700NiCD/3000NiMH
TP6000 4S/5S3P
50mm spinner
40amp controller 16 cells draws 38.amps @ 6100 rpm

wing span 43.5 inches
length 47inches
weight 6.5 lbs. flying weight
Wingloading 90g dm2

Item# KMcrtmass02
USD~$289.00


Home | Back to Scale Planes | Edf Units | Electric Motors | Propulsion | Email Us!

Phone: 330-872-1000